Modeling and characterization of PCB coils for inductive wireless charging

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Wireless charging is emerging as a viable technology in many industries, including consumer, medical, and sensor electronics. An investigation of design principles is conducted for a wireless charging platform that is designed to charge devices of different sizes and technologies, using only through vias. It is shown that at a 5 mm separation distance, a coupling coefficient can be achieved which varies from 0.12 to 0.37 when staggered hexagonal transmitter coils (approximately 5 cm across) are used with an unstaggered square receiver coil, which declines to 0.06–0.11 at 2 cm separation. Without design measures, the coupling coefficient will approach zero at certain positions. The quality factors of the coils can be improved by stacking the coils in parallel, enabling the use of only through-vias, while the inductance can be controlled horizontally by increasing the number of turns in the inductor

Design and Comparison of 24 GHz Patch Antennas on Glass Substrates for Compact Wireless Sensor Nodes

Three patch antennas suitable for integration and operation in a compact 24 GHz wireless sensor node with radar and communication functions are designed, characterized, and compared. The antennas are manufactured on a low loss glass wafer using thin film (BCB/Cu) wafer level processing (WLP) technologies. This process is well suited for 3D stacking. The antennas are fed through a microstrip line underneath a ground plane coupling into the patch resonator through a slot aperture. Linear polarization (LP), dual mode (DM) operation, and circular polarization (CP) are achieved through the layout of the slot aperture and rectangular patch dimensions. Antenna gain values of ∼5.5 dBi are obtained in addition to the 10 dB impedance bandwidths of 900 MHz and 1.3 GHz as well as 500 MHz CP bandwidth with a 3 dB axial ratio for the LP, DM, and CP patch antennas, respectively